Home Design & Layout Fountain Products Floating Fountains/Pond Aeration Water Garden products Pro-Fabricated Fountains  

Oase Atlantis Pumps

The Oase Atlantis series submersible centrifugal pumps are designed specifically for architectural, municipal, and commercial fountain applications, as well as larger residential ponds. Five sizes are currently offered from 1/2 horsepower through 2 Hp, with flow rates up to 110 GPM.

The Oase Atlantis series pumps meet the rigid technical standards and specifications used in the design of architectural, industrial, commercial, and municipal applications. Oase Atlantis pumps can be used in installations fed with city water supplies, or reclaimed water supplies.
All Atlantis pumps are constructed with glass filled polypropylene volute and impeller, brass end plates, stainless steel suction screen and cooling shroud. Motors are stainless steel water cooled types, with no internal oil to leak out.

Oase Pumps & Fountains has a staff of experts trained and experienced in practical and technical engineering problems and are capable of designing and building the finest in turbine pump equipment. Our exacting standards of highest-quality materials, egineering, inspection, and testing are your assurance that the Oase Atlantis pumps will deliver dependable performance for your application.

Technical Description:

  • Standard sizes from 1/2Hp to 2Hp
  • Available in single or three phase power, 60Hz standard, 50Hz available (for 50Hz operation, derate the pump curves approximately 20%). Single phase 2Hp pumps require an external starter capacitor box
  • Cord length is 10 ' standard. Longer cord lenghts are available on request
  • Discharge is axial 2 " male NPT threads. For ease of installation and best serviceability, it's recommended that a union fitting be used on the outlet
  • Impeller:Balanced glass filled polypropylene, designed for maximum efficiencies with a wide range of hydraulic coverage and corrosion resistance
  • The NFPA NEC (National Electrical Code) Article 680 (Fountains) limits submersible pumps to 300 volt or less operation and requires a Ground Fault Circuit Interrupter (GFCI or GFI) listed for personnel protection be installed. For this reason, we don't offer any submersible pump for distribution in the USA with an input power higher than 240 volts. Provide proper GFCI protection on installation
  • UL Listed

  Home | Design & Layout | Fountains | Aerators / Floating Fountains | Pond Aeration | Water Garden Products | Pre-Fabricated Fountains | Contact Us | Privacy | Site Map | Resources
Commercial Fountains | Outdoor Fountains