|
|
|
|
Spray
Rings Fountain Nozzle
Whimsical, playful, soothing. All describe the effect
of our Architectural Spray Rings. Add excitement and
class. Create the delightful, lulling sound of a gentle
waterfall. With spray arcs adjustable as much as 24
degrees and available in 21 standard sizes, we have
a model to suit your application, or we can fabricate
custom sizes in several materials depending on your
requirements.
|
Visibility |
|
|
|
|
|
|
Noise Level |
|
|
|
|
|
|
Splash |
|
|
|
|
|
|
Wind Stability |
|
|
|
|
|
|
Energy Efficiency |
|
|
|
|
|
|
|
Made of a circular copper
(or other special material) tube fitted with Comet nozzles
that each provide a clear stream jet, the effect is a
large, symmetrical display with minimal water consumption.
Spray rings have been a mainstay of fountain design, usually
when coupled with a cascade nozzle or statuary center
piece, and are the perfect choice to fill a particular
pool since they can be configured to spray from the edge
to the center, containing splash within the pool itself.
Each Comet nozzle is adjustable 24° (12° off center)
giving you the precise aiming necessary for a perfect,
exacting appearance.
- Architectural Spray Rings are equipped with Comet
nozzles, which are adjustable smooth bore nozzles
with straightening vanes.
- Architectural Spray Rings are water level independent
and can be located in "dry" areas.
- deally the spray ring is mounted in a pool or body
of water, with the center of the ring at water level.
- Architectural Spray Rings are equipped with several
inlet ports depending on the size and model. These
ports are all female NPT threads. All ports should
be fed with equal flow and pressure, as the ring is
designed to equalize nozzle pressures only between
feeds.
- Architectural Spray Rings are equipped with rigid
copper (or other special material) legs and are delivered
cut to a ring tube center to ground distance of 24".
These legs can be cut down to provide a ring height
of 18", or be set into the pool floor by drilling
and epoxy. The legs fit into sockets on the bottom
of the ring and are through-bolted in place. Custom
sized legs or special configurations are available.
- Bottom drains are provided for winterizing.
- 20 standard sizes of architectural spray rings made
of copper are listed here, however, we can make rings
of any size and configuration, and made of brass,
red brass, and stainless steel. We do not offer Spray
Rings made of plastic.
|
| |
 |
|
|
